Driver Modem Huawei E5372s May 2026

In the world of portable networking, few devices have achieved the legendary status of the Huawei E5372s. Often referred to as a "MiFi" or portable hotspot, this 4G LTE mobile router is known for its rugged reliability, long battery life, and the ability to connect up to 10 devices simultaneously. However, like any sophisticated piece of hardware, its functionality depends heavily on the correct interaction with your computer’s operating system. This is where the Driver Modem Huawei E5372s becomes essential.

Right-click the Start button and select Device Manager . Look under "Other devices" or "Portable Devices." You will likely see "Huawei Mobile Broadband" with a yellow exclamation mark, or "Unknown Device."

If you have ever plugged your Huawei E5372s into a Windows PC or Mac via USB and found that the internet didn’t work, or that the device was unrecognized, you have encountered a driver issue. This article provides an exhaustive deep dive into everything you need to know about the drivers for the Huawei E5372s, including installation steps, manual configuration, firmware updates, and solving the most common error codes. Before we tackle the software, let us acknowledge the hardware. The Huawei E5372s (often including sub-models like E5372s-32, E5372s-601, or E5372s-155) is a category-defining MiFi device. It supports 4G LTE Cat4 speeds (up to 150Mbps download), has an OLED display for signal and data monitoring, and houses a 1500mAh or 1780mAh battery (depending on the revision).

Turn on the Huawei E5372s. Ensure it has a SIM card inserted and has a 4G signal. Plug it into the computer via a high-quality USB data cable (not just a charging cable).