Injection is working! Found 3 APs If injection fails, your adapter might be a counterfeit or a different chipset (e.g., Realtek). | Error Message | Cause | Solution | |---------------|-------|----------| | ath9k_htc: No such device | Adapter not plugged in or dead | Check lsusb . Try another USB port. | | usb 1-1: Direct firmware load for htc_9271.fw failed | Missing firmware | sudo apt install firmware-atheros | | Error: Operation not supported | Interface is in managed mode | Down the interface, set monitor mode correctly. | | wlan0: Unknown error 524 | RF kill switch enabled | sudo rfkill unblock wifi | | Injection: 0/0 packets | Power management or bad adapter | iwconfig wlan0 power off | Part 7: Optimizing AR9271 Performance on Kali Linux To get the most out of your adapter, apply these tweaks. Disable Power Management sudo iwconfig wlan0 power off Make permanent:
sudo modprobe ath9k_htc If you see an error like "Operation not permitted" or "Unknown symbol", you may need to reinstall the kernel headers and module. sudo apt install linux-headers-$(uname -r) sudo modprobe -r ath9k_htc sudo modprobe ath9k_htc Scenario C: USB Autosuspend Issues Sometimes, power management suspends the USB device. Disable autosuspend: install atheros ar9271 driver kali linux
However, a common point of confusion, especially for newcomers to Kali Linux, is the misconception that the AR9271 driver needs to be "installed" manually. In reality, the situation is more nuanced. Injection is working
Using iw (manual method):
sudo airmon-ng check kill Or manually: