| Feature | KA 54 REMSL TOP | Standard NBR O-Ring | Generic 54mm U-Cup | |---------|----------------|----------------------|----------------------| | Pressure rating | 350 bar dynamic | 100 bar | 200 bar | | Temperature range | -35 to +110°C | -20 to +80°C | -20 to +90°C | | Lifespan (cycles) | ~10 million | ~1 million | ~3 million | | Cost | High | Low | Medium | | Compatibility with rough rods | Good (PTFE lining) | Poor | Fair |
A: The "-2" suffix usually indicates a wider groove version (e.g., 10.5 mm instead of 8.1 mm) for heavier-duty applications. Conclusion The KA 54 REMSL TOP is far more than a rubber ring; it is a precision-engineered component that ensures the reliability of hydraulic systems across multiple industries. Understanding its specifications, correct installation, and common pitfalls can save thousands in downtime and repairs.
When sourcing or servicing, always insist on genuine TOP-grade materials, follow the groove preparation guidelines, and maintain oil cleanliness. Whether you are troubleshooting a leaking excavator cylinder or designing a new press, the KA 54 REMSL TOP—when used correctly—delivers exceptional performance and durability. ka 54 remsl top
For further technical support, consult the original component manufacturer's catalog or a certified fluid power engineer. Part numbers and specifications mentioned are based on industry standards. Always verify with your OEM documentation before ordering or installing.
A: The TOP grade integrates an anti-extrusion element. However, for continuous pressures above 400 bar, a separate PTFE backup ring is advised. | Feature | KA 54 REMSL TOP |
A: Stored in cool, dark, and dry conditions (<35°C, no ozone), it lasts 10 years.
| Specification | Value | |---------------|-------| | Component Type | Rod or Piston Seal | | Nominal Diameter (d) | 54 mm (Inner) | | Groove Width (L) | 8.1 mm to 9.5 mm (depending on housing) | | Cross Section | Asymmetric, with scraper lip | | Material | TPU + PTFE bronze-filled (TOP grade) | | Hardness (Shore A) | 92 ± 2 | | Max. Pressure | 450 bar (static), 350 bar (dynamic) | | Max. Speed | 0.5 m/s | | Temperature Range | -35°C to +110°C (intermittent +125°C) | | Fluid Compatibility | Mineral oils (HLP), synthetic esters, water-glycol | When sourcing or servicing, always insist on genuine
Introduction In the world of precision engineering and industrial machinery, part numbers are the DNA of maintenance and repair operations. One such designation that has been gaining traction among technical specialists and procurement officers is the KA 54 REMSL TOP . While the alphanumeric string may seem cryptic at first glance, it represents a critical component within specific mechanical assemblies.