Mpu6050 Proteus Library Best Site

| MPU6050 Pin | Proteus Connection | Notes | | :--- | :--- | :--- | | | +5V | The library has an internal 3.3V regulator simulation | | GND | Ground | | | SCL | A5 (Arduino Uno) or Pin 6 (STM32) | Add a 4.7k pull-up resistor to VCC | | SDA | A4 (Arduino Uno) or Pin 7 (STM32) | Add a 4.7k pull-up resistor to VCC | | ADO | GND | Sets I2C address to 0x68 (Standard) | | INT | Any digital pin | Optional; used for data ready interrupt |

#include <Wire.h> #define MPU6050_ADDR 0x68 #define WHO_AM_I_REG 0x75 mpu6050 proteus library best

void loop() {}

Wire.requestFrom(MPU6050_ADDR, 1); if(Wire.available()) byte whoami = Wire.read(); if(whoami == 0x68) Serial.println("SUCCESS: MPU6050 detected!"); else Serial.print("ERROR: Wrong ID: 0x"); Serial.println(whoami, HEX); | MPU6050 Pin | Proteus Connection | Notes

Wire.beginTransmission(MPU6050_ADDR); Wire.write(WHO_AM_I_REG); Wire.endTransmission(false); if(Wire.available()) byte whoami = Wire.read()