The — now globally harmonized as an SDS (Safety Data Sheet) — is the document that bridges the gap between chemical utility and occupational safety. For plant managers, environmental health and safety (EHS) officers, and maintenance crews, understanding this document is not just regulatory compliance; it is operational necessity.
| Chemical Name | CAS Number | Typical Weight % | Hazard Notes | | :--- | :--- | :--- | :--- | | (e.g., ATMP or HEDP) | 2809-21-4 | 20 – 40% | Corrosive; chelating agent. | | Acrylic copolymer | Proprietary | 10 – 20% | Low hazard, but enhances dispersancy. | | Inorganic acid (e.g., Sulfuric or Phosphoric) | 7664-93-9 or 7664-38-2 | 1 – 5% | Increases corrosivity; adjusts pH. | | Water | 7732-18-5 | Balance | Non-hazardous vehicle. | nalco 8506 plus msds
Given that Nalco 8506 Plus is a liquid with low vapor pressure, inhalation risk primarily comes from created during high-speed mixing, tank filling, or spray applications. The — now globally harmonized as an SDS
Introduction In the world of industrial water treatment, Nalco 8506 Plus is a well-known commodity. It is a high-performance scale and corrosion inhibitor, primarily used in cooling water systems, boilers, and once-through systems. However, a chemical’s efficacy is only half the story. The other half is safety. | | Acrylic copolymer | Proprietary | 10
| Component | OSHA PEL | ACGIH TLV | | :--- | :--- | :--- | | Sulfuric acid | 1 mg/m³ | 0.2 mg/m³ (thoracic) | | Phosphoric acid | 1 mg/m³ | 1 mg/m³ |
End of Article