Phison Ps225107ps2307 Hot [RECOMMENDED]
A: No. 70°C is the danger zone . Normal should be 35°C–50°C.
The (often labeled on the chip as "PS2307") is a USB 3.0 to NAND flash controller. It is a single-chip solution designed for high-speed external storage. Launched in the mid-2010s, it became infamous for its aggressive performance tuning. phison ps225107ps2307 hot
| Symptom | What is happening | | :--- | :--- | | after 2 minutes of copying a large video file. | Controller junction temp exceeds 80°C. | | Speed suddenly drops 90% (e.g., 100 MB/s → 10 MB/s). | Firmware thermal throttling activates. | | Windows "Code 43" or "USB Reset Failed" | Controller thermal shutdown causes a voltage sag, disconnecting the USB bus. | | Copy pauses for 10-20 seconds before resuming slowly. | NAND controller enters error recovery mode due to bit errors caused by heat. | | Drive disappears and reappears in File Explorer. | Thermal protection circuit tripped. | The (often labeled on the chip as "PS2307") is a USB 3
A: Absolutely. Move the PCB into a metal USB enclosure with a thermal pad. This drops temps by 20-30°C. | Symptom | What is happening | |
By: Tech Recovery Labs
If you have searched for the term , you are likely experiencing the same frustration as thousands of other USB flash drive users. You plug in your drive—often a Kingston DataTraveler, Corsair Voyager, or Patriot Memory stick—and within minutes, the casing is too hot to touch. Data transfer speeds start high (100+ MB/s) but suddenly plummet to single digits (2–5 MB/s), and the drive may even disconnect from Windows with a “USB Device not recognized” error.
