Library: Rc522 Proteus

Introduction The RC522 is arguably the most popular RFID/NFC module for hobbyists and engineers working with Arduino, PIC, and AVR microcontrollers. Its low cost (often under $5) and ability to read and write 13.56MHz Mifare Classic cards make it a staple in access control, inventory systems, and smart locking mechanisms.

void loop() // Look for new cards if (!mfrc522.PICC_IsNewCardPresent()) return; rc522 proteus library

void setup() Serial.begin(9600); SPI.begin(); mfrc522.PCD_Init(); Serial.println("Scan a virtual card..."); Introduction The RC522 is arguably the most popular

// Select one card if (!mfrc522.PICC_ReadCardSerial()) return; " 0" : " "); Serial

// Show UID on serial monitor Serial.print("Card UID: "); for (byte i = 0; i < mfrc522.uid.size; i++) Serial.print(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " "); Serial.print(mfrc522.uid.uidByte[i], HEX);

However, before soldering a single wire or risking physical hardware, every smart developer simulates first. This is where Proteus Design Suite (specifically Proteus ISIS) shines. But there is a catch:

// Halt PICC mfrc522.PICC_HaltA(); delay(1000);