Do you have any suggestion? Click here to submit media.
| Frequency | Task | | :--- | :--- | | | Clean dust filters. Use compressed air on the CPU cooler and PSU. | | Monthly | Re-apply thermal paste if CPU exceeds 85°C under load. | | Quarterly | Check USB port voltages using a USB multimeter (should be 5.0V ±0.25V). | | Bi-annually | Replace CMOS battery. A dying battery causes voltage fluctuations that mimic heat issues. | | Annually | Run a RAM test (MemTest86). Bad RAM creates memory errors that software reads as “binded PC changed.” |
Check your TPM chip (if you have Windows 11). A TPM firmware update can change the HWID. Roll back the TPM driver in Device Manager. unlock tool binded pc problem hot
By: Tech Recovery Team | Updated: 2026
If you are a technician, a repair shop owner, or a DIY enthusiast, you have likely encountered the dreaded scenario. You plug in your expensive unlocking dongle (like Medusa, Octoplus, Z3X, or Easy JTAG), and instead of working, your computer screams: Overheating, Thermal Shutdown, or USB Overcurrent. | Frequency | Task | | :--- | :--- | | | Clean dust filters