Introduction The YF-S201 is arguably the most popular water flow sensor among hobbyists, students, and engineers working on Arduino, ESP32, or STM32 projects. It is inexpensive, reasonably accurate, and easy to interface. However, when moving from physical prototyping to simulation, many developers hit a wall.
void loop() unsigned long now = millis(); if (now - lastTime >= 1000) // Every second detachInterrupt(digitalPinToInterrupt(2)); yf-s201 proteus library
flowRate = (pulseCount / PULSES_PER_LITER) * 60.0; // L/min totalLiters += flowRate / 60.0; // Add volume for 1 second Introduction The YF-S201 is arguably the most popular
void setup() Serial.begin(9600); pinMode(2, INPUT_PULLUP); attachInterrupt(digitalPinToInterrupt(2), pulseCounter, FALLING); lastTime = millis(); and engineers working on Arduino